Salt Spray Test Chambers from IDM


Salt Spray Test Chambers

SA Series

Automotive Testing Equipment


Salt spray test chambers are designed for testing surface treatment of various materials such as coatings, galvanize, organic or inorganic film, anti-rust oil, chemical treatment of corrosion resistance etc.

Test Types:
NSS Test - Neutral Salt Spray Test
ACSS Test - Acetic Acid Salt Spray Test
CASS Test - Copper Salt Accelerated Acetic Acid Salt Spray Test
Series Types:

SA-O Economical Series NSS - Button Operation
SA-P Advanced Series NSS, ACSS, CASS – Touch Screen Operation

• CNS 3627 • CNS 3885 • CNS 4159 • CNS 7669 • CNS 8866 • JIS D-0201 • H-8502 • H-8610 • K5400 • Z-2371 • ISO 3768 • ISO 3769 • ISO 3770 • ISO 9227 • ASTM B-117 • ASTM B-268 • ASTM D1735 • GB-T2423, • GJB150 • GB10587-89 • GB 2423-17 • IEC68-2-11

Comments

Post a Comment

Popular posts from this blog

Portable Foam Compression Tester from IDM

Image
MINIFLEX CLD Why measure foam hardness?   All foamers measure the density of their product. Not all foamers, however, measure foam hardness. Foam hardness has a major influence on the comfort factor of the furniture, bedding or automotive product in which it is used. Variation in hardness is one of the most common complaints from customers. Trying to judge the hardness of a foam sample by hand-feel is almost impossible. Every person will have a different opinion. To ensure consistent Quality Control of foam production, it is necessary to have an industry recognised foam hardness test procedure that will give an accurate, recordable value. The foam industry measures foam hardness by various different tests. These can be grouped as either ILD (Indentation Load Deflection) or CLD (Compression Load Deflection) type tests. The test procedure first measures the thickness of the foam sample (pre-load). It is then compressed 3 times to 30% of its original t
Read more

IDM Instruments Crease & Stiffness Testers

Image
IDM's Crease & Stiffness Tester model C0039 and Cutter model C0016 has been released by IDM Instruments and comes in a new design. IDM’s precision cutter is designed to assist in the easy and accurate cutting of sample specimens for both crease stiffness and bending stiffness (resistance) testing. Benefits of Crease & Stiffness Testers include: ■ Consistency ■ Increased productivity ■ Decrease in waste material ■ Profit growth IDM’s precision cutter is designed to assist in the easy and accurate cutting of sample specimens for both crease stiffness and bending stiffness (resistance) testing. Now available with standard RS232 and software, the IDM Crease and stiffness tester can automatically capture the output of results to a PC where stiffness/crease ratios can be calculated, test results saved, and test reports created and printed. This makes the CST even more easy to use with accurate precision results.
Read more